Overblog
Edit page Follow this blog Administration + Create my blog

Welding Neck Flanges

Published by Sum Xu  - Categories:  #Welding Neck Flanges

The Welding neck flanges is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. The welding neck flange is the best designed butt-welded flange of those currently available becuase of its inherent structural value. It is expensive because of the design.

Standards, Dimensions & Weight
Specifications:

Size: 1/2” to 60”, DN 12mm to DN 1500mm
Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250
Facing: RF / RTJ

Material:view... Cabon steel: A105, A350 LF2, C22.8, S355JR
Stainless steel: A182 F304/F304L/F316/F316L/F321
Alloy steel: F11, F12
Packing: plywood case and plywood pallet

NW Long Weld Neck Flanges
NW Long Weld Neck Flanges
NW Long Weld Neck Flanges

Tube OD sizes: 3/8 to 2 inches

Materials:
Flange: 304 or 316L stainless steel
O-rings: Viton, Buna, & silicone
Fasteners: Wingnut, SureSeal, bulkhead & EVAC clamps

Vacuum range
Elastomer seal: >=1 x 10^-8 Torr - High vacuum
EVAC metal seal: >=1 x 10^-11 Torr - UHV

Temperature range
Viton: -20°C to 200°C
Silicone: -50°C to 230°C
Buna: -30°C to 110°C
EVAC metal seal: -270°C to 150°C

Welding Neck Flanges

About this blog

The pipe flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. Below are our available industrial pipe flanges that will meet your project needs.